Professional cleaning solution
AS-BIOX, 5liter, cleaning solution
This cleaning solution is a non – hazardous, non – toxic, non – flammable fluid. Tested by Finnish Research Centre, Thames Water and the National Water Council and approved by Lloyds Register.
Removes impurities such as:
Grease, oil and contaminants from oxygenated breathing apparatus, scuba diving gear, and life support systems…
Safe to use on:
Painted chrome and textile items, as well as iron, steel, copper, brass, aluminium.
before cleaning after cleaning
Does not require dilution in water. Use only this fluid in ultrasonic cleaner. The operating temperature should be 50°C. For more contaminated items try a higher operating temperature or a longer cleaning cycle. Rinse all items with clean water after ultrasonic cleaning. Change the cleaning solution in the ultrasonic cleaner regularly when it becomes dirty.
This solution is safe to use on many materials, although we recommend testing all ultrasonic cleaning concentrates and solutions prior to new application on materials that you have not cleaned before, or contact us for further information.
Clean without compromise with ultrasonic cleaning concentrate designed to meet the unique challenges of commercial cleaning.
Besides ultrasonic power, temperature and processing time, especially balanced cleaning concentrates are also necessary to achieve optimum ultrasonic cleaning results. ASonic offers a wide range of adequate low foaming cleaning concentrates. All of the ASonic ultrasonic cleaning concentrates are especially developed for ultrasonic application. With their properties that aid to cavitation, the cleaning concentrates improve the cleaning process and are gentle to the material at the same time.
It is now easier than ever to control your cleaning costs whilst maximizing your performance with ASonic concentrates. The concentrates have formulation to clean the most difficult soils while making your cleaning operation more efficient. The usage of concentrates shortens the cleaning time significantly. The cavitation improving and material protecting features allow for a maximum effect of the ultrasonic cleaning.
Cleaning process description
Ultrasonic cleaners use high frequency directed in a water bath and the operation of ultrasound produces tiny bubbles. The bubbles spread throughout the liquid and when they hit surface of the object they implode, releasing energy that removes impurities attached to the surface (even in the grooves, holes, notches and all other hard to reach places).
Carefully place the basket with items in ultrasonic cleaner. Fill the tank with mixture of distilled water and cleaning concentrate at desired rate. Fully submerge items for cleaning in the solution. Set the desired cleaning temperature and activate the tank heater. Wait for liquid in tank to reach set temperature, and than set ultrasound timer in accordance with requirements of the cleaning process, depending on the type and degree of soiling of cleaning item. Once cleaning is complete, wait for liquid to cool down and then carefully remove basket with items. Rinse items with clean water. Change bath regularly when the solution becomes dirty.
WARNING
- Use product only as directed on the label.
- Keep out of reach from children.
- Always test ultrasonic cleaning concentrates prior to new application on materials that you have not cleaned before.
DOCUMENTATION
Safety Data Sheet (MSDS) Document